Oceanic OCi, Operating Manual

63

OCi OPERATING MANUAL

© 2002 Design, 2013

Doc. No. 12-5335-r02 (9/12/13)

OVERVIEW

>  S (2 sec) - to access the Compass OP (operating) Main from the Watch, Surface, or Dive Main.
>  S (2 sec) or no button action (2 min*) - to revert to the Watch, Surface, or Dive Main.

*During the fi nal 15 seconds, the remaining On time is displayed.  If a button is pressed during that time, the 2 minute On 

time will reset allowing operation to continue in Compass Mode for another full 2 minutes.

>  The Compass OP Mode selected (North, Reference) remains until changed.
>  Reference OP Mode is used to set a course, also to Reverse the course set by 180°
>  Numeric values are displayed as 3 digits (000 to 360°), have a resolution of 001°, and an accuracy of +/- 005°.
>  Operation will be normal and display of values will be within specifi ed tolerances up to a 20° tilt.  

Upon accessing the Compass, the OP (operating) Main of the last mode selected will be displayed >> North Mode (Fig. 158), 
Reference Mode (Fig. 159), or Reverse Reference Mode (Fig. 160).  

To access the Compass Menu, when viewing the OP Main while on the surface, press M (< 2 sec).

COMPASS MENU,

 information includes  (Fig. 161):

>  Graphic Goto, with selections >>
>  NORTH MODE - to select as the Operating Mode with no set heading.
>  REF MODE - to select as the Operating Mode allowing a heading to be set.
>  CALIBRATE - to access a Calibration start screen.
>  SET DECLIN - to access to Declination Set Menu.

•  A (< 2 sec) - to step forward (down) through selections.
•  M (< 2 sec) - to step back (up) through selections
•  S (< 2 sec) - to select the item indicated by the pointer ( > ) icon.

If NORTH or REF MODE is selected, that mode will be saved and its OP Main will be displayed.

•  S (2 sec), while viewing the Menu - to revert to the Compass OP Main.
•  M (2 sec), at any time, except while in Calibration - to revert to the Compass OP Main.
•  No button action (2 min) - revert to Watch, Surface, or Dive Main. 
•  L (< 2 sec) - to toggle the Backlight On/Off.
•  L (2 sec), while the Backlight is On - to reset the timer and keep it On for the duration time set.

NORTH OP MAIN,

 information includes (Fig. 162A):

>  Current Depth with FT (or M) icon, blank on surface.
>  North Mode icon (letter N in box).
>  Static Arrow icon (at 12 o'clock), diver direction of travel.
>  Dynamic (moving) Arrow, relative direction of magnetic North.
>  Tilt icon*, when the Compass is at an angle => 20° off level.
>  Numeric heading (diver's current direction), 001 to 360°,  with position graphic (N, E, SE, etc.).  *

Blank when the Tilt icon 

is displayed.

>  On time remaining, counting down, if 15" to 01" ( 

"

 means seconds).  

Blank when > 15 seconds.

•  M (< 2 sec), while on the surface - to access the Compass Main Menu.
•  M (< 2 sec), during dives - to apply a snapshot Earmark to the PCI data recorded at that time.  

The graphics EARMARK 

APPLIED will be displayed in place of Compas information for 3 seconds (Fig. 162B).

•  S (2 sec) or 2 minutes of no button action - will revert to the Watch, Surface, or Dive Main.
•  L (< 2 sec) - to toggle the Backlight On/Off.
•  L (2 sec), while the Backlight is On - to reset the timer and keep it On for the duration time set.

REFERENCE OP MAIN,

 information includes (Fig. 163):

>  Current Depth with FT (or M) icon, during dive mode, 00 during fi rst 10 min on surface, blank on surface > 10 min.
>  Reference Mode icon (2 bars with arrow) with numeric Reference heading (course) set above it.
>  Static Arrow icon (at 12 o'clock), diver direction of travel.
>  Turn Arrow icon (left or right) fl ashing during any time the diver deviates => 10° off the heading set.
>  Dynamic (moving) Arrow, tracking the Reference direction set.
>  Tilt icon*, when the Compass is at an angle => 20° off level.
>  Numeric heading (diver's current direction), 001 to 360°, with position graphic (N, E, SE, etc.).  *

Blank when the Tilt icon is 

displayed.  

>  On time remaining, counting down, if 15" to 1".  

Blank when > 15 seconds.

•  M (< 2 sec), while on the surface - to access the Compass Main Menu.
•  M (< 2 sec), during dives - to apply a snapshot Earmark to the PCI data recorded at that time.  

The graphics EARMARK 

APPLIED will be displayed in place of Compas information for 3 seconds (similar to Fig. 162B).

•  A (< 2 sec) - to access the Reference Menu, surface or dive.
•  S (2 sec) or 2 minutes of no button action - will revert to the Watch, Surface, or Dive Main.
•  L (< 2 sec) - to toggle the Backlight On/Off.
•  L (2 sec), while the Backlight is On - to reset the timer and keep it On for the duration time set.

Fig. 158 - NORTH OP MODE 

Fig. 160 - REVERSE REF

Fig. 159 - REF OP MODE

Fig. 162A - NORTH OP MAIN

(at 050°)

Fig. 161 - COMPASS MENU

Fig. 163 - REF OP MAIN

(at 110°, turn right to 150°)

actual

heading

course

set

180° opposite

course set

On time 

remaining

Fig. 162B - NORTH OP MAIN

(shown for 3 seconds)