Oceanic OCL, Operating Manual

10

OCL OPERATING MANUAL

© 2002 Design, 2014

Doc. No. 12-5378-r01 (4/9/15)

WATCH MENU

A (< 2 sec) - to step forward through selections one at a time.

S (< 2 sec) - to access the selection displayed.

M (< 2 sec) - to step back through selections one at a time.

M (2 sec, any time) - to revert to the Watch Main.

No button action (2 min) - revert to the Watch Main.

L (press) - to activate the Backlight.

WATCH ALT,

 information includes (Fig. 5A/B):

>  Dual Time (hr:min) with DUAL icon, if Show is set for No, or Date as month.day (or day.month)

>  Temperature with graphic F (or C)

>  Altitude graphic EL2 (to EL 7), blank if Sea level

•  A < 2 sec - to step forward to the CDT Lead-in.

•  M (< 2 sec) - to step back to the Watch Main.

CDT (COUNTDOWN TIMER) 

This selection provides access to a CDT for use in Watch mode.  

Upon accessing a dive computer mode, Watch CDT operation will be terminated and the time reset to the previous setting. 

>  Free Mode has a separate (min:sec) CDT.

CDT Lead-in, 

information includes (Fig. 6):

>  Graphics Goto and CDT.

•  S (< 2 sec) - to access CDT Status.

•  A (< 2 sec) - to step forward to the Chrono Lead-in.

•  M (< 2 sec) - to step back to the ALT.

CDT Status, 

information includes (Fig. 7):

>  Remaining CDT (hr:min) with ON, if in progress; or 

    0:00 with OFF if the CD is complete or hasn't been set; or 

    CDT previously set with OFF

>  Graphic CDT - OFF (or ON)

•  A (< 2 sec) - to step forward through selections of OFF, ON, and SET.

•  M (< 2 sec) - to step back through selections.

•  S (< 2 sec) - to save the selection.

>> If OFF or ON is selected, revert to the Lead-in screen.

>> If SET is selected, access the Set CDT screen.

Set CDT, 

information includes (Fig. 8):

>  Graphics SEt and CDT

>  CDT (hr:min) with Hour digits flashing 

•  A (hold) - to scroll upward through Hour Set Points at a rate of 8 per second from 0: to 23: in increments of 1: (hr). 

•  A (< 2 sec) - to step upward through Set Points one at a time.

•  M (< 2 sec) - to step back through Set Points one at a time.

•  S (< 2 sec) - to save the Hour Set Point and flash the Minute digits.

•  A (hold) - to scroll upward through Minute Set Points at a rate of 8 per second from :00 to :59 in increments of :01 

(min). 

•  A (< 2 sec) - to step upward through Set Points one at a time.

•  M (< 2 sec) - to step back through Set Points one at a time.

•  S (< 2 sec) - to save the CDT setting and revert to the CDT Status screen with the graphic SEt flashing.

>  Selecting ON will then start the countdown and revert to the Lead-in screen.

>  Selecting OFF will save the setting and revert to the Lead-in screen.

The CDT will run in the background, while in Watch mode, until it counts down to 0:00, or it is set OFF, or DC Mode is ac-

cessed or a Dive is started in which case the countdown will terminate and revert to OFF.

When a set Countdown Time reaches 0:00, the Audible Alarm will sound during which time the graphic CDT and 0:00 will 

flash on the Watch Main Time screen (Fig. 9). 

WATCH MENU

ALT

CDT

CHRONO

DAILY ALARM

SET T

Fig. 5A - WATCH ALT

(differential set)

Fig. 6 - CDT LEAD-IN

Fig. 7 - CDT STATUS

Fig. 8 - SET CDT

Fig. 5B - WATCH ALT

(Dual Time on Main)

Fig. 9 - WATCH MAIN

(when CDT alarm strikes)