Oceanic PRO PLUS 3, Operating Manual

15

PRO PLUS 3 OPERATING MANUAL

© 2002 Design, 2012

Doc. No. 12-5332-r01 (11/19/12)

Set TLBG Alarm,

 information includes (Fig. 23):

>  Graphic OFF (or ON) flashing.

>  TLBG, last value saved (number of segments).

>  Graphic TLBG. 

•  A (< 2 sec) to step through selections OFF, ON, and Set, one at a time.

•  S (< 2 sec) to save the selection and flash the TLBG segments, if Set is saved; or access Set DTR Alarm, if OFF or ON is 

saved.

•  S (2 sec) to step back to Set EDT Alarm.

•  A (< 2 sec) to step through TLBG set points one segment at a time.

•  S (< 2 sec) to save the setting and flash Set, allowing ON or OFF to be selected/saved.

•  S (2 sec) to step back to Set EDT Alarm. 

Set DTR Alarm,

 information includes (Fig. 24):

>  Graphic OFF (or ON) flashing.

>  Time with NDC, OTR, and min icons, last time value saved. 

>  Graphic DTR.

•  A (< 2 sec) to step through selections OFF, ON, and Set, one at a time.

•  S (< 2 sec) to save the selection and flash the Time digits, if Set is saved; or access Set Turn Alarm, if OFF or ON is saved.

•  S (2 sec) to step back to Set TLBG Alarm.

•  A (hold) to scroll upward through Time set points at a rate of 8 per second from 5 through 20 (min) in increments of 1 min. 

•  A (< 2 sec) to step through Time set points one at a time.

•  S (< 2 sec) to save the setting and flash Set, allowing ON or OFF to be selected/saved.

•  S (2 sec) to step back to Set TLBG Alarm.

Set Turn Pressure Alarm,

 information includes (Fig. 25):

>  Graphic turn.

>  Graphic OFF (or ON) flashing.

>  Tank Pressure with PSI (or BAR) icon, last value saved. 

•  A (< 2 sec) to step through selections OFF, ON, and Set, one at a time.

•  S (< 2 sec) to save the selection and flash the Pressure digits, if Set is saved; or access Set End Alarm, if OFF or ON is 

saved.

•  S (2 sec) to step back to Set DTR Alarm.

•  A (hold) to scroll upward through Pressure set points at a rate of 8 per second from 1000 through 3000 PSI (70 to 205 

BAR) in increments of 250 PSI (5 BAR). 

•  A (< 2 sec) to step through set points one at a time.

•  S (< 2 sec) to save the setting and flash Set, allowing ON or OFF to be selected/saved.

•  S (2 sec) to step back to Set DTR Alarm.

Set End Pressure Alarm,

 information includes (Fig. 26):

>  Graphic turn.

>  Graphic OFF (or ON) flashing.

>  Tank Pressure with PSI (or BAR) icon, last value saved. 

•  A (< 2 sec) to step through selections OFF, ON, and Set, one at a time.

•  S (< 2 sec) to save the selection and flash the Pressure digits, if Set is saved; or revert to Set Alarms Lead-in, if OFF or ON is 

saved.

•  S (2 sec) to step back to Set Turn Alarm.

•  A (hold) to scroll upward through Pressure set points at a rate of 8 per second from 500 through 1500 PSI (20 to 105 BAR) 

in increments of 100 PSI (5 BAR). 

•  A (< 2 sec) to step through set points one at a time.

•  S (< 2 sec) to save the setting and flash Set, allowing ON or OFF to be selected/saved.

•  S (2 sec) to step back to Set Turn Alarm.

------------------------------------------------------------------------------------------------------------------------------------------------------

TLBG

Fig. 25 - Set TURN AL

Fig. 26 - Set END AL

Fig. 24 - Set DTR AL

Fig. 23 - Set TLBG AL