Oceanic PRO PLUS 3, Operating Manual

24

PRO PLUS 3 OPERATING MANUAL

© 2002 Design, 2012

Doc. No. 12-5332-r01 (11/19/12)

Dive Mode is activated when a descent is made to 5 FT (1.5 M) for 5 seconds 

and continues until ascent is made to 2 FT (0.6 M) for 1 second.

NO DECO DIVE MAIN,

 information includes (Fig. 52A/B) -

>  Current Depth with FT (or M) icon.

>  NX, DSAT (or Z+), Gas 1 (2, 3), CF, DS icons - those that apply.

>  Dive Time Remaining (DTR), with NDC (or OTR) and min icons.

>  Air Time Remaining, with ATR icon, 2 dashes ( - - ) if Gas 2 or 3  is in use.

>  Pressure, with PSI (or BAR) icon, graphic SPG (Submersible Pressure Gauge) if Gas 2 or 3  is in use.

>  TLBG, if any.

>  VARI, while ascending.

•  A (< 2 sec) to access ALT 1.

•  A (2 sec) to access Gas Switch routine, unless Gas 2 is set Off.

•  S (< 2 sec) to acknowledge alarms.

•  S (press) to activate SMARTGLO Backlight.

NO DECO ALT 1,

 information includes (Fig. 53):

>  Max Depth with MAX and FT (or M) icons.

>  Elapsed Dive Time with EDT and min icons.

•  A (< 2 sec) to access ALT 2.

•  Revert to Main in 10 sec, if A not pressed.

•  S (press) to activate Backlight.

NO DECO ALT 2,

 information includes (Fig. 54):

>  Time of Day (hr:min), with AM (or PM) icon if 12 Hour Format, no icon if 24 Hour Format.

>  Temperature with °F (or °C).

•  A (< 2 sec) to access ALT 2 (if Nitrox).

•  Revert to Main in 5 sec, if A not pressed.

•  S (press) to activate Backlight.

NO DECO ALT 3 

(only if Nitrox), information includes (Fig. 55):

>  O2 with O2% icon, % of allowable accumulation for a dive or day.

>  NX, DSAT (or Z+), Gas 1 (2, 3), CF icons - those that apply.

>  Current PO2 value (ATA) with icon.

>  FO2 setting for the Gas in use with icon.

•  A (< 2 sec) to access Deep Stop Preview, if triggered; revert to Main if not.

•  10 sec or A (< 2 sec) to revert to Main.

•  S (press) to activate Backlight.

DEEP STOP (DS) PREVIEW

 information includes (Fig. 56):

>  Current Depth with FT (or M) icon.

>  Calculated Stop Depth with FT (or M) icon, DS icon, and Stop Time as 2:00 with min and sec icons.

>  Graphic DSP (meaning Deep Stop Preview).

•  Revert to Main after 10 sec or A (< 2 sec).

•  S (press) to activate Backlight.

TLBG

VARI

TLBG

VARI

TLBG

VARI

TLBG

VARI

Fig. 52A - NO DECO MAIN

(Gas 1 in use, with Pressure)

Fig. 53 - NO DECO ALT 1

Fig. 54 - NO DECO ALT 2

Fig. 56 - DS PREVIEW

Fig. 55 - NO DECO ALT 3

Fig. 52B - NO DECO MAIN

(Gas 2 in use, no Pressure)

TLBG

VARI

TLBG

VARI