Oceanic PRO PLUS 3, Operating Manual

6

PRO PLUS 3 OPERATING MANUAL

© 2002 Design, 2012

Doc. No. 12-5332-r01 (11/19/12)

TLBG

VARI

OVERVIEW

Features >>

•  2 Control Buttons (A, S)

•  User Replaceable Battery

•  6 Menus

•  27 Set Selections

•  Variable Set Values

•  Fresh/Sea Water selection 

•  2 Operating Modes

•  3 Gas

•  Warnings/Alarms

•  Dual Algorithm

INTERACTIVE CONTROL CONSOLE

The Interactive Control Console utilizes 2 control buttons that allow you to maneuver through the Pro Plus 3's unique system of 

menus.

The buttons are referred to as S and A.

•  Left Front >> Advance (A)

•  Right Front >> Select (S)

MENU SYSTEM

The LCD viewing area is used to display alpha numeric messages and measured values as well as Menu (group) type systems for 

selection of settings and various auxiliary functions.  

The Menus (groups) include -

•  NORM Main

•  GAUG Main

•  Set Gas

•  Set Alarms

•  Set Utilities

•  Set Time

•  Set Operating Mode

Each Menu sequence has a start (first) selection and a stop (last) selection.  Upon entering a Menu, movement through it begins at 

the start (first) selection, then continues in a rolling manner showing one selection at a time.  

•  The sample at the right shows how a menu would look if all of the selections would be displayed on one screen. 

Menu button action >>

A (< 2 sec) - to access and step forward through menu selections

A (hold) - to scroll forward through menu selections

S (< 2 sec) - to access or save selections

A (< 2 sec), while viewing the last selection in the menu, will revert to the first selection (such as Surface Main).

At any time while on the surface, depressing A and S simultaneously (2 sec) will revert operation to the Surface Main.  Exception 

is during the first 10 minutes after surfacing from a dive. 

A

S

•  No Deco Deep Stop

•  No Deco Safety Stop

•  Gauge Depths to 400 FT/120 M

•  Altitude Compensation

•  NDL Conservative Factor

•  Variable Ascent Rate

•  PC Settings Upload/Data Download

•  Audible Alarm with flashing LED

•  User Upgradable Firmware

DISPLAY COMPONENTS

Descend, Ascend, or Stop

Low Batt

ICONS

HIST =  

History Mode

SURF = 

Surface Time

FLY =   

Time to Fly

O2% = 

% Saturation

DSAT = 

Algorithm

Z+ =   

Algorithm

CF =   

Conservative Factor

# =   

Dive Number

ATR =   

Air Time Remaining

NX =   

Nitrox Mode

MAX = 

Maximum

M =   

Meters

FT =   

Feet

Temp

Sample Menu

(all selections shown)

Gas in use

ICONS

OTR =  

O2 Time Remaining

SAT =  

Desaturation Time

NDC = 

No Deco Time Remaining

TAT =   

Total Ascent Time (Deco)

SS =   

Safety Stop

DS =   

Deep Stop

PO2 =  

Partial Pressure of O2

min =   

Minutes 

sec =   

Seconds

FO2 =  

Fraction of O2 (%)

EDT =  

Elapsed Dive Time

PSI =   

Pressure units (imperial) 

BAR =  

Pressure Units (metric)

Tissue 

Loading

Bar

Graph

Variable

Ascent

Rate

Indicator

MAIn.MenU.

(group.sequence)

MAIn

ALt.1

ALt.2

ALt.3

FLY/sAt

PLAn

LoG

set.GAs

set.ALARMs

set.UtILItIes

set.tIMe

seLeCt.oP.Mode

HIstoRY

sn