38
®
Secondary Display (access if Alternate is set ON or OFF)
To view water Temperature, Time of Day, and if FO2 was set for a numerical
value, display the current level of PO2 (Fig. 40):
• press the Advance (Left) button 1 time
• the unit will revert to the Main Display after 10 seconds, if the Advance
(Left) button is not pressed again.
Alternate Display (access only if Alternate is set ON)
To view water Elapsed Dive Time and Maximum Depth in Large Format in
place of Current Depth and Dive Time Remaining (Fig. 41):
• press the Advance (Left) button 2 times, or -
• press the Advance (Left) button 1 time, if viewing Temp/Time/PO2.
• the unit will revert to the Main Display after 10 seconds, or if the Ad-
vance (Left) button is pressed.
The Graphic Diver Interface (bar graphs) will be active with each display
representing nitrogen loading, oxygen accumulation (if FO2 was set for a value
other than Air), ascent rate, and breathing gas time remaining.
Fig. 41 - Alternate Display
Fig. 40 - Secondary Display
20
0 5
10
30 40 50 60
NO DECO
C Z
DECO
C Z
O
2
PSI
20
0 5
10
30 40 50 60
NO DECO
C Z
DECO
C Z
O
2
PSI
MAX
FT
