POWER SUPPLY
(refer to Reference section of the Operating Manual)
•
VEO 1.0 - (1) 3 volt type CR2450 Lithium Battery, 560 mAhr
•
Shelf Life - up to 5 years
•
Use Life -100 hive hours if (1) 1 hour dive per day up to 300 dive hours if (3) 1 hour
dives per day
•
Replace the Battery prior to dive trips and vacations when multiple days of diving
are planned.
•
Calculations and settings retained after Battery replacement.
•
Dispose of battery according to local regulations that apply to Lithium cells.
EU (EUROPEAN UNION) DIRECTIVES
•
The VEO 1.0 is in compliance with the essential safety requirements of EU EMC
directive 89/336/EEC and PPE directive 89/686/EEC.
•
EU standards comformity certified by SGS United Kingdom Ltd, Weston -
super - Mare, BS22 6WA, UK, Notified Body No. 0120.
•
The VEO 1.0 is designed to comply with EN13319:2000 Diving accessories - Depth
gauges and combined depth and time measurement devices - Functional and safety
requirements, test methods. Any information on decompression obligation displayed
by equipment covered by this standard is explicitly excluded from its scope.
© 2002 Design, 2009
Doc. No. 12-5208-r01 (11/3/09)
NORM (Dive)
ALT 1
ALT 2
O2%, FO2,
PO2
Time, Temp
DS Preview
Deep Stop
Safety Stop
NORM (Surface)
at 2 ft (0.6 M)
for 1 sec
at 5 ft (1.5 M)
for 5 sec
at 1/2 Max Depth for
2 min after Depths
> 80 FT (24 M)
to Main
5s
B
No Deco Main
at 15 FT (4.5 M) for
3 min after Depths
> 30 FT (9 M)
< 2s
2s
< 2s
ACTIVATION
Press and release the button. The display comes full on displaying all segments then a
countdown sequence, then the Surface Main screen.
MAINTENANCE
(refer to the Reference section of the Operating Manual)
•
Rinse thoroughly with fresh water after activities in salt water.
•
Annually >> take the VEO 1.0 to an Authorized Oceanic Dealer for inspection.
Replace the Battery prior to dive trips and vacations when multiples days of diving are
planned.
SPECIFICATIONS
(refer to the General section of the Operating Manual)
•
Max Operating Depth = 400 FT (120 M)
Depth Accuracy - +/- 1% full scale
•
Time Accuracy - +/- 1 second per day
•
Dive Mode - entered at 5 FT (1.5 M) for 5 seconds.
•
Post dive Surface Mode after 10 minutes on surface following ascent to 2 FT (0.6
M) for 1 second.
•
Repetitive Dive - NORM (or GAUG) after 10 minute post dive SI, FREE after 1 minute
post dive SI.
•
Altitude Adjustments (of Ni-O2 calculations & depth calibration) - begin at 3,001
feet (916 meters) elevation, continues up to max operating elevation of 14,000 feet
(4,270 meters).
•
Operating Temperature (in air) - 20 to 140 F (- 6 to 60 C)
•
Operating Temperature (in water) - 28 to 95 F (- 2 to 35 C)
