17
Backup Activation (
only if Water Activation is set ON)
As a backup, the unit will also automatically activate by water
contact. This is accomplished by bridging the gap between
contacts located on the Button and housing.
If no dive is made within 2 hours after activation, the unit will
deactivate. If the wet contacts are still wet, it will reactivate.
SURFACE SEQUENCE
While on the surface, the unit will automatically scroll through a
Sequence of displays including -
• Surface Mode
• Fly Mode
• DeSat Mode
• Plan Mode
As the Surface Sequence is scrolling, you can use the button to
access Log Mode and Set Mode.
SURFACE MODE
Surface Mode information includes (Fig. 9) -
• Dive Number if the module is dry (0 if no dive made yet), or
the graphic H2O if the module is wet (Fig. 10)
• Temperature (and icon).
• Time of Day (with icon).
• Surface Interval (with flashing colon) and Surface Time icon.
Fig. 9 - Surface Mode
(module is dry)
Fig. 10 - Surface Mode
(module is wet)
