19
You can set:
• Units of Measure - Imperial or Metric
• Hour Format - 12 or 24
• Time of Day
• Date
• Digital Gauge Mode - On or Off
• Water Activation - On or Off
To Access Set Mode and enter Settings:
While the unit is scrolling through the Surface Sequence -
• Press and hold the Button for 2 seconds, release when the Set
Units screen appears with the graphics FT and F (or M and C)
flashing (Fig. 12).
• HINT: To bypass a parameter that you do not
want to set, keep the Button depressed until the
item you do want to set appears, then release it.
To change the setting for Units of Measure -
• Press the Button momentarily and release to toggle between
Imperial (FT and F) and Metric (M and C).
• Press and Hold the Button for 2 seconds to save the setting,
release when the graphic Hour and 12 (or 24) appear with
12 (or 24) flashing (Fig. 13).
Fig. 12 - Set Units of Measure
Fig. 13 - Set Hour Format
