38
If a Violation occurred during the dive a single dash ( - ) will
appear instead of the letters FLY (Fig. 39). DeSat time will not be
displayed.
The Time to Fly counter is provided to assist you with deciding
when enough surface time has elapsed to fly (or travel to higher
elevations).
• After a surface interval of 12 hours, you may choose to fly (or
travel to higher elevations), provided that your dive profile(s)
did not enter decompression.
• If your diving involved decompression or a repetitive, multi
day profile, it is strongly recommended that you wait a full 24
hours after your last dive to add a greater degree of protec-
tion.
Pre Dive Planning Sequence (PDPS)
After a dive, the PDPS provides 'adjusted' No Decompression
Limits (Fig. 40) based on residual nitrogen calculated to be
remaining from that dive and previous dives in the same series.
Log Mode
The Veo 100 will store up to 12 dives in its Log for viewing.
Each dive has 2 Log screens. The first is the Dive Identifier and
the second displays Dive Data.
Fig. 39 - Fly Mode
(after a Violation dive)
Fig. 40 - Adjusted NDLs
