39
Once the Log is full (12 dives), each subsequent dive will then
overwrite the oldest dive stored in the Log. It is therefore sug-
gested that you transfer the Log's data to your log book at the
end of each day of diving.
Log data will not be lost when the battery is removed/replaced,
however, factory service and calibration will delete the data.
The first dive conducted each time the unit is Activated will be
#1, therefore there may be multiple #1 dives in the Log.
Dives are displayed in a reverse sequence that starts with the dive
most recently recorded, back to the oldest one stored. The most
recent dive will always be the first shown in the sequence.
To access Log Mode
-
• Press and release the Button momentarily (< 2 seconds) while
the unit is scrolling through the Surface Sequence.
• The first screen (Dive Identifier) of the most recent dive con-
ducted will appear displaying (Fig. 41) -
• Dive Number (for that activation period)
• Log Mode icon
• Date of the Dive
• Time of Day (that the dive started)
• Press the Button momentarily to view the Second Screen.
Fig. 41 - Log (Dive Identifier)
