44
CARE AND CLEANING
Protect your Veo 100 from shock, excessive temperatures,
chemical attack, and tampering. Protect the Lens against
scratches with an Instrument Lens Guard/Protector. Small
scratches will naturally disappear underwater.
• Soak and rinse the Module in fresh water at the end of each
day of diving, and check to ensure that the areas around the
Low Pressure (Depth) Sensor (Fig. 46a), Interface Port (Fig.
46b), and Button are free of debris or obstructions.
• To dissolve salt crystals, use lukewarm water or a 50%
white vinegar/50% fresh water bath. After removal from
the bath, place the Module under gently running fresh water
and towel dry before storing.
• Transport your Veo 100 cool, dry, and protected.
INSPECTIONS AND SERVICE
Your Veo 100 should be
inspected annually
by an Autho-
rized Oceanic Dealer who will perform a factory prescribed
function check and inspection for damage or wear. To keep the
2 year limited warranty in effect, this inspection must be com-
pleted one year after purchase (+/- 30 days).
Oceanic recommends that you continue to have this inspection
performed every year to ensure it is working properly. The costs
of annual inspections are not covered under the warranty.
Fig. 46 - Case Back
a
b
