27
TO SET - ELAPSED DIVE TIME ALARM
(while in the Surface Mode)
Factory set for 0:00 hr:min, the Alarm can be set to values
between 0:10 and 3:00 hr:min in increments of 0:05 hr:min.
Press Both buttons simultaneously, release when SET: 1
appears.
Press and release the Left/Front (Advance) button, FO2
appears with the value flashing.
Press the Left/Front (Advance) button 2 more times.
The graphic EdT, and Alarm and Dive Time icons appear
with the Elapsed Dive Time value flashing (Fig. 22).
Press and release the Right/Side (Select) button until the
desired Alarm value appears, or press and hold the button to
scroll through the Set Points.
Press the Left/Front (Advance) button to accept the setting
and advance to PC Interface, or press and hold Both buttons
for 2 seconds to revert to Surface Mode.
Fig. 22 - Set Elapsed Dive
Time Alarm
