62
RESET FEATURE
This dive computer is configured with a RESET feature that allows
data to be cleared, including Nitrogen and Oxygen calculations,
FO2 set point, and Log Mode entries.
RESET PROCEDURE:
While in SURFACE MODE (new activation period or after a
10 minute post dive surface interval), press the Left/Front
(Advance) button 1 time to access PLAN MODE.
While 30 feet (or 9 meters) is displayed in the PLAN MODE,
press and hold Both buttons until SET 2 appears, then release
the buttons.
Press and release the Left/Front (Advance) button to display
the Clear screen (Fig. 65). The first 2 digits of the KEY
CODE flash.
To change the number, press and release the Right/Side
(Select) button to increase the digits to 01.
Press and release the Left/Front (Advance) button again to
display the second 2 digits of the KEY CODE, flashing.
To change the number, press and release the Right/Side
(Select) button to increase the digits to 01.
Press and release the Left/Front (Advance) button to com-
plete the RESET operation and turn the unit OFF.
WARNING:
Reset after a
dive and sub-
sequent use for
a repetitive
dive conducted
by the same
diver could
result in seri-
ous injury to or
death.
Fig. 65 - Reset (Clear)
