65
To view that dive's Log
(Fig. 67) -
Refer to page 66 for a description of the Log Mode displays.
Press the Left/Front (Advance) button 1 time.
Press the Right/Side (Select) button 1 time to view the
Nitrogen data screen.
Press the Right/Side (Select) button again to view the
Oxygen data screen (if a nitrox dive).
Press Both buttons simultaneously for 2 seconds to return to
Surface Mode.
The unit will revert to Surface Mode after 2 minutes if no
button is pressed.
Log Data will not be stored in the unit's memory until the 10
minute Transition Period on the surface is completed.
Once 10 minutes have elapsed, the Surface Mode icon and
Surface Interval time display colon stop flashing indicating that
the Dive and Transition Period are completed, and a subsequent
descent will be considered a new dive.
If you descend during the 10 minute Transition Period, time
underwater will be considered a continuation of that dive. The
time at the surface (if less than 10 minutes) will not be added as
Dive Time.
Fig. 67 - Log Mode
(during Transition Period)
