37
TO SET - FO2 50% DEFAULT
(while in the Surface Mode)
Factory set ON, the FO2 50% Default feature can be set to
OFF. The effects of this feature being ON or OFF are described
on page 17.
Press Both buttons simultaneously, release when SET: 2
appears.
Press and release the Left/Front (Advance) button, the Units
screen appears with the set point flashing.
Press the Left/Front (Advance) button 11 more times.
The graphics FO2 and 50 appear with ON (or OFF)
flashing (Fig. 35).
Press and release the Right/Side (Select) button to toggle
between ON and OFF.
Press the Left/Front (Advance) button to accept the setting
and advance to Set Backlight Duration, or press and hold
Both buttons for 2 seconds to revert to Surface Mode.
Fig. 35 - Set FO2 50% Default
