40
TO SET - USER SET DIGITAL GAUGE MODE
(while in the Surface Mode)
Factory set OFF, Digital Gauge Mode can also be set ON. The
effects of this feature being ON or OFF are described on page
58.
Press Both buttons simultaneously, release when SET: 2
appears.
Press and release the Left/Front (Advance) button, the Units
screen appears with the set point flashing.
Press the Left/Front (Advance) button 14 more times.
The graphic GAU appears with OFF (or ON) flashing (Fig.
38).
Press and release the Right/Side (Select) button to toggle
between ON and OFF.
Press the Left/Front (Advance) button to accept the setting
and advance to Set Water Activation, or press and hold Both
buttons for 2 seconds to revert to Surface Mode.
Fig. 38 - Set Digital Gauge
Mode
NOTE:
Once a dive is made
with this feature set
ON, the setting will be
locked ON for 24
hours after the dive.
Set Digital Gauge
Mode will not appear
as a selection during
that 24 hour period.
