74
SIMULATOR MODE
This mode provides you with the ability to practice various
dive mode scenarios and computer functions while observing
the various displays.
The SmartGlo Backlight functions as it normally does.
At any time while in Simulator Mode, pressing and
holding both buttons simultaneously for 2 seconds shall
revert operation to real Surface Mode.
The set points entered into the Veo 200/250 do not affect
the operation of the Simulator which has its own settings
that allow Digital Gauge Mode to be set ON or OFF,
calculations to be cleared, and FO2 to be set.
Access and Setup
(while in Surface Mode)
Press and hold Both buttons for 6 seconds.
Release the buttons during the 2 second window when
DEMO and SIM appear (Fig. 79).
Press and release the Left/Front (Advance) button to
access SIM MODE. The graphics DEMO and GAU will
appear with OFF (or ON) flashing (Fig. 80).
When set ON, the SIMULATOR will operate as the unit
would in User Set Digital Gauge Mode only displaying
Depth and Elapsed Dive Time. When set OFF, it operates
as it would as an Air or Nitrox computer.
Fig. 80 - Set Demo Gauge
Fig. 79 - Simulator Mode
