84
Battery Removal
Remove the Retaining Bar located across the lower portion of
the Battery (Fig. 91a).
Remove the Hatch O-ring. DO NOT use tools
Using care not to damage the Battery Contacts (Fig. 91b/c),
slide the Battery up and out of the Battery Compartment.
Inspection
Closely check all of the sealing surfaces for any signs of
damage that might impair proper sealing.
Inspect the Button, Lens, and Housing to ensure they are not
cracked or damaged.
If it is necessary to clean the Battery Compartment, flush it
and all components with a solution of 50% white vinegar
and 50% fresh water. Rinse with fresh water, and allow to
dry overnight, or blow dry with a hair dryer (set at 'no heat').
WARNING: If damage or corrosion is found, return
your Veo 200/250 to an Authorized Oceanic Dealer,
and DO NOT attempt to use it until it has received
factory prescribed service.
Fig. 91 - Hatch Removed
a
b
c
