87
RETURNING THE MODULE TO BOOT
If the Boot was fitted with a Spacer and it was previously
removed, replace the Spacer into the Boot.
Orient the Module over the opening in the Boot, and dip the
bottom edge into it while pressing the top edge with the palm
of your hand. Stop pressing when the bottom edge of the
Module has just entered the Boot.
Correct the alignment of the Module as needed so that it is
straight.
Press the Module completely into place with your thumbs,
watching the alignment, until it snaps into place.
R
E
S
P
O
N SIBLE
D
IV
E
R
