24
SET MODES
To help simplify the operations you might perform at the dive
site, settings are divided into 2 categories. Set Mode #1 in-
cludes several settings that you would change more often and
Set Mode #2 includes those items not likely to change once you
set them. Set Mode 2 can be accessed by first entering settings
in Set Mode 1, or by bypassing Set Mode 1.
After gaining access to Set Mode 1 or Set Mode 2, settings can
be made in sequence one after the other, or you can access a
specific item that you want to set, bypassing others.
Set Mode Access/Timing
While in Surface Mode, press Both buttons simultaneously and
hold -
after 2 seconds, SET: 1 appears (Fig. 17)
after 2 more seconds, SET: 2 appears (Fig. 18)
Access is gained by releasing the buttons during the 2
second window in which SET: 1 or SET: 2 appears. then
pressing the Left/Front (Advance) button.
If the buttons are held longer, SET 1 and 2 are both by-
passed, the unit will go to Simulator (Demo) Mode which is
described on page 69.
While in the Set Mode(s), if neither button is pressed during
a 2 minute period, the unit will revert to Surface Mode.
Fig. 17 - Set Mode 1
Fig. 18 - Set Mode 2
