66
AFTER THE TRANSITION PERIOD (THE FIRST 2 HOURS)
For the remainder of the first 2 hours after surfacing,
information will continue to be displayed as Surface Mode
(Fig. 68) and you will have full access to other modes (e.g.,
PDPS, Fly, Desat, Log, Set, etc.).
To activate the Backlight -
Press the Right/Side (Select) button.
To access the Pre Dive Planning Sequence -
(Also refer to page 44)
Press the Left/Front (Advance) button 1 time (while in
Surface Mode).
Press and release the Right/Side (Select) button to ad-
vance through the sequence of available 'adjusted' depths
and times one screen at a time.
The unit will revert to Surface Mode after 2 minutes, unless
the Left/Front (Advance) button is pressed to access the Fly
Mode.
The Pre Dive Planning Sequence now shows adjusted No
Decompression Limits (Fig. 69) based on residual nitrogen
and accumulated oxygen calculated to be remaining from the
previous dives.
Fig. 68 - Surface Mode
(greater than 10 minutes)
Fig. 69 - Adjusted NDLs
