97
Battery Cover Removal
• Turn the module over to expose the Battery Cover.
• While applying steady inward pressure on the center of
the Battery Cover, rotate the Retaining Ring 10 degrees
clockwise by pressing against the upper tab of the Ring
with a small blade screwdriver (Fig. 114).
• Lift the Ring up and away from the Housing, or turn the
Module over to allow the Ring to drop out into your hand.
• Remove the Battery Cover.
Battery Removal
• Remove the Retaining Bar located across the lower portion
of the Battery (Fig. 115a).
• Remove the Cover O-ring. DO NOT use tools.
• Slide the Battery up and out of the Battery Compartment.
Inspection
• Closely check all of the sealing surfaces for any signs of
damage that might impair proper sealing.
• Inspect the Button, Lens, and Housing to ensure they are not
cracked or damaged.
WARNING: If damage or corrosion is found,
return your VEO to an Authorized Oceanic
Dealer, and DO NOT attempt to use it until it has
received factory prescribed service.
Fig. 114 - COVER RING
Fig. 115 - RETAINING BAR
a
Summary of Contents for VEO 3.0
