Oceanic VT 4.0, Operating Manual

40

VT 4.0 OPERATING MANUAL

© 2002 Design, 2011

Doc. No. 12-5213-r02 (9/6/11)

FREE SURF MAIN

, information includes (Fig. 93):

>  SI (min:sec up to 59:59, then hr:min) with Time (clock) and SURF icons.

>  Graphic FREE (operating mode).

>  Graphic DIVE and number of dives completed during that operating period, up to 99 (0 if no dive made yet).

>  Temperature with 

°

 icon and graphic F (or C).

>  Battery icon, if voltage is low.

•  A (< 2 sec) to access ALT 1.

•  M (< 2 sec) to access FREE Main Menu. 

•  M (2 sec) to access FREE Shortcut. 

•  S (2 sec) to access Compass.

•  S (< 2 sec) to activate Smartglo Backlight.

FREE SURF ALT 1

, information includes (Fig. 94):

>  SI (min:sec) with Time (clock) and SURF icons.

>  Max Depth with graphics FT (or M) and MAX.

>  Elapsed Dive Time (min:sec up to 9:59, then 10 - if >) with graphic EDT.  

>  Graphic LAST, indicating that data is from the dive previously conducted while in FREE mode.

•  A (< 2 sec) to access ALT 2.

•  10 sec, revert to Main if A is not pressed. 

•  S (< 2 sec) to activate Backlight.

FREE SURF ALT 2

, information includes (Fig. 95):

>  Altitude graphic, if EL2 (to EL7), blank if Sea level.

>  Time of Day (hr: min) with graphic A (or P).

•  A (< 2 sec) to revert to Main.

•  5 sec, revert to Main if A is not pressed.

•  S (< 2 sec) to activate Backlight.

FREE MENU

•  M (< 2 sec) to access Menu (Fig. 96), while viewing FREE Surface Main.

•  A (< 2 sec) to step forward (down) through selections.

•  M (< 2 sec) to step back (up) through selections.

•  S (< 2 sec) to access the selection indicated by pointer icon ( > ).

•  S (2 sec) to revert from the Main Menu to Surface Main.

•  M (2 sec) any time to revert to Surface Main.

•  2 min (no button action) will revert to Surface Main. 

CD TIMER (Countdown Timer)

Upon access from the Menu, one of the following is displayed -

>  OFF solid and 0:00, if no time was previously set.

>  ON and the remaining CD Time (min:sec), if running.

>  OFF flashing and the time previously set, if it has ended.

CDT Status, 

information includes (Fig. 97):

>  CD Time (min:sec) with Time (clock) icon. 

    >> 0:00 with colon solid, if no time set.

    >> 0:00 with colon flashing, if On and no time left. 

    >> remaining time with colon flashing, if On and running.

    >> time previously set with colon solid, if not started yet.

>  Graphic OFF, select to Stop CD if running.

>  Graphic ON, select to Start CD if a time is displayed (stopped or not yet started).

>  Graphics SET and MIN:SEC, select to set a CD time.

•  A (< 2 sec) to step forward (down) through selections.

•  M (< 2 sec) to step back (up) through selections.

•  S (2 sec) to revert to Main Menu.

•  S (< 2 sec) to save the selection and ->

    >> if OFF or ON, Stop or Start the CD then revert to Main.

>> if SET, the graphic MIN and left (minute) digits of the Time will flash (Fig. 98).  

•  A (hold) to increase Minute Set Point at a rate of 8 per second from 0: to 59: in increments of 1: (min). 

•  A (< 2 sec) to increase Set Point one at a time.

•  M (< 2 sec) to decrease Set Point one at a time.

•  S (< 2 sec) to save the Minute setting and flash the Seconds digits and graphic SEC.

•  A (hold) to increase Seconds Set Point at a rate of 8 per second from :00 to :59 in increments of :01 (sec). 

•  A (< 2 sec) to increase the Set Point one at a time.

•  M (< 2 sec) to decrease the Set Point one at a time.

•  S (< 2 sec) to save the full CDT min:sec setting and revert to the CDT Status screen with OFF flashing.

Fig. 94 - FREE SURF ALT 1  

(Last dive)

Fig. 93 - FREE SURF MAIN  

(no dive yet)

Fig. 95 - FREE SURF ALT 2

(EL if above Sea level)

Fig. 96 - FREE SURF MENU

Fig. 97 - CDT STATUS

Fig. 98 - SET CDT