14
FEET
ATR
5
10
20
0
PSI
O
2
M
A
X
Depth Displays
During a dive, the
Current Depth
display (Fig. 6a), indicates Depths from 0 to 399 feet
(120 meters) in 1 foot (.1 meter) increments.
By pressing the Front (Advance) button, the
Maximum Depth
reached during that dive
will be displayed (Fig. 6b).
During a Decompression Dive, the required
Ceiling Stop Depth
is displayed in the Max
Depth position. Maximum Depth can be viewed by pressing the Front (Advance) button.
Time and Date Displays
Time displays
are shown in hour:minute format (i.e., 1:16 represents 1 hour and 16
minutes, not 116 minutes!). The colon that separates hours and minutes blinks once per
second when the display is indicating real time (e.g., Elapsed Dive Time), and is solid (non-
blinking) when times are calculated projections (e.g., Time to Fly).
The
Main Time
display has the largest digits of the display (Fig.
6c) A
second time
display (Fig. 6d) is located above it. Both
displays are identified by clock icons.
Date
is displayed only to identify dive data while it is viewed in
the Log Mode. When Units of Measure are set for 'Imperial', the
Month appears to the left of Day. When set for Metric, the
Month appears to the right of Day.
Fig. 6 - Cylinder Pressure
and Depth Displays
b
a
c
a
d
