30
PC INTERFACE
PC Interface is not a setting, it is included in the Set 1 menu for
easy access when data is to be downloaded (copied) to the PC
download software program for storage and viewing.
To download data
(while in the Surface Mode)
-
• Press Both buttons simultaneously, release when SET: 1
appears (2 seconds).
• Press and release the Front (Advance) button,
FO2
appears
with the set point value flashing.
• Press the Front (Advance) button
3 more times.
• The graphic
PC
appears with a 120 second countdown timer
(Fig. 27). Download must be initiated before the timer
reaches 00 (within 2 minutes).
• Download is initiated by the external device requesting data
transfer (i.e., the PC download program).
• The unit reverts to Surface Mode after completion of the
Download operation, or after 2 minutes if neither button is
pressed.
ENTERING SETTINGS - SET MODE #2
These settings are ones that are not likely to change. To save
time at the dive site, verify the set points and adjust them as
desired prior to departing on the day's dive trip.
Fig. 27 - PC Download
ATR
O
2
For more information
regarding PC
Interface, refer to
page 73 of this
manual and to
documents provided
with the OceanLog
PC download
product.
