31
TO SET - UNITS OF MEASURE
(while in the Surface Mode)
Factory set for Imperial, Units of Measure can also be set for
Metric.
• Press Both buttons simultaneously, release when SET: 2
appears (4 seconds).
• Press and release the Front (Advance) button, the Units screen
appears with the graphics FT, F, and PSI (or M, C, and BAR)
flashing (Fig. 28).
• Press and release the Side (Select) button to toggle between
Imperial and Metric units.
• Press the Front (Advance) button to accept the setting and
advance to Set Hour Format, or press and hold Both buttons
for 2 seconds to revert to Surface Mode.
TO SET - HOUR FORMAT
(while in the Surface Mode)
Factory set for 12 Hr (12: Am to 11: Pm), the Format can also be
set for 24 Hr (0: to 23: hours).
• Press Both buttons simultaneously, release when SET: 2
appears (4 seconds).
• Press and release the Front (Advance) button, the Units screen
appears with the set point flashing.
• Press the Front (Advance) button
1 more time.
• The graphic
Hour
appears with
12
(or 24) flashing (Fig.
29).
Fig. 28 - Set Units of Measure
Fig. 29 - Set Hour Format
ATR
O
2
ATR
O
2
