34
TO SET - AUDIBLE ALARM
(while in the Surface Mode)
Factory set for ON, the Alarm can be also be set to OFF. This
setting also applies to the red LED Warning Indicator that is
synchronized with the Audible Alarm.
When set OFF, the Alarm will not sound during the conditions
described on page 16.
• Press Both buttons simultaneously, release when SET: 2
appears (4 seconds).
• Press and release the Front (Advance) button, the Units screen
appears with the set point flashing.
• Press the Front (Advance) button
7 more times.
• The graphic
ALM
and Alarm (speaker) icon appear with
On
(or OFF) flashing (Fig. 35).
• Press and release the Side (Select) button to toggle between
ON and OFF.
• Press the Front (Advance) button to accept the setting and
advance to Set Max TLBG Alarm, or press and hold Both
buttons for 2 seconds to revert to Surface Mode.
TO SET - MAX TLBG ALARM
(while in the Surface Mode)
Factory set for DECO (all 8 segments), the Maximum Tissue
Loading Bar Graph (TLBG) Alarm can be set to values between
DECO (all 8 segments) and 1 segment.
Fig. 35 - Set Audible Alarm
ATR
O
2
