40
TO SET - BACKLIGHT DURATION
(while in Surface Mode)
Factory set for 3 seconds, the Backlight Duration can be set to
values of 0, 3, or 7 seconds. This is the length of time the Back-
light stays On after the button is released.
• Press Both buttons simultaneously, release when SET: 2
appears (4 seconds).
• Press and release the Front (Advance) button, the Units screen
appears with the set point flashing.
• Press the Front (Advance) button
15 more times.
• The graphic
GLO
and Time icon appear with the
Duration
value flashing (Fig. 44).
• Press and release the Side (Select) button to advance the
Duration from :00 to :03 to :07 (seconds).
• Press the Front (Advance) button to accept the setting and
advance to Set Sampling Rate, or press and hold Both buttons
for 2 seconds to revert to Surface Mode.
TO SET - PC SAMPLING RATE
(while in Surface Mode)
Factory set at 15 seconds, the Sampling Rate can be set at values
of 2, 15, 30, or 60 seconds, or 2, 5, or 10 feet (.5, 1.5, or 3
meters).
Sampling Rate is the interval at which data samples are recorded
during a dive for subsequent download to the PC program. This
setting has no effect on displayed or Log data.
Fig. 44 - Set Backlight
Duration
ATR
O
2
