67
To view that dive's Log
(Fig. 81) -
• Press the Front (Advance) button 1 time.
• Press the Side (Select) button 1 time to view the Nitrogen
data screen. See page 71.
• Press the Side (Select) button again to view the Oxygen data
screen (if a nitrox dive). See page 71.
• Press Both buttons simultaneously for 2 seconds to return to
Surface Mode.
• The unit will revert to Surface Mode after 2 minutes if no
button is pressed.
Log Data will not be stored in the unit's memory until the 10
minute Transition Period on the surface is completed.
Once 10 minutes have elapsed, the Surface Mode icon and
Surface Interval time display colon stop flashing indicating that
the Dive and Transition Period are completed, and a subsequent
descent will be considered a new dive.
AFTER THE TRANSITION PERIOD (THE FIRST 2 HOURS)
For the remainder of the first 2 hours after surfacing, information
will continue to be displayed as Surface Mode (Fig. 82) and you
will have full access to other modes (e.g., Plan, Fly, Desat, Log,
Set, etc.).
To activate the Backlight, press the Side (Select) button.
Fig. 81 - Log Mode
(during Transition Period)
Fig. 82 - Surface Mode
(after Transition Period)
ATR
O
2
ATR
PSI
O
2
