72
AFTER THE FIRST 2 HOURS
Two hours after the last dive, Surface Mode will no longer be
displayed, the Time to Fly and Desaturation countdowns will be
displayed alternately for 3 seconds each until they count down to
0:00 or another dive is made.
To access other modes or enter settings -
• Press Either button to return to Surface Mode (Fig. 89).
• The unit will again revert to the Time to Fly and Desaturation
countdowns after 2 hours, if no button is pressed.
WET CONTACTS
If the graphic
H2O
appears during the Fly Mode (Fig. 90) and
Desaturation Mode (Fig. 91) countdowns that alternate 2 hours
after a dive, it is an indication that the water activation contacts
are bridged (still wet) and the unit must be rinsed in fresh water
and thoroughly dried.
The contacts are located in the stems of the control button.
• Once the unit is dry, the graphic
H2O
will disappear from
the display.
• If the unit is not cleaned and dried prior to the countdowns
reaching 0:00 (hr:min), or making another dive, it will shut off
then automatically reactivate.
Fig. 89 - Surface Mode
Fig. 91 - Desaturation Mode
(Activation Contacts Wet)
Fig. 90 - Fly Mode
(Activation Contacts Wet)
ATR
O
2
ATR
O
2
ATR
O
2
