92
TRANSMITTER INSTALLATION
To install the Transmitter on your Regulator First Stage:
• Remove the existing Pressure Gauge and High Pressure Hose,
or the High Pressure Port Plug from the Port marked HP using
the proper size Hex Key.
• Lightly lubricate the O-ring and Threads of the Transmitter
fitting with a halocarbon based lubricant such as Christo-Lube
MCG111 (provided in Oceanic Battery Kits).
• Thread the Transmitter clockwise by hand into the Regulator's
HP Port and tighten until secure with a 5/8" open-end
wrench.
• Attach the Regulator First Stage to a full Scuba Tank and
pressurize by slowly opening the Tank Valve, listening for any
indication of air leaking around the Fitting.
• If air leakage is present, DO NOT use, take the complete
Regulator Assembly to an Authorized Oceanic dealer for
inspection and service.
TRANSMITTER COMPATIBILITY WITH NITROX
Oceanic VT Pro Transmitters are rated for use with
compressed Air and/or nitrogen-oxygen (Nitrox)
breathing gas mixtures containing up to 40% O2 by
volume without the need for special cleaning or
component parts.
R
E
S
P
O
N SIBLE
D
IV
E
R
