9
Metal and Carbon Fibre Huil (with Delrin Sleeve)
Product Name
Metric
Imperial
50 XFM HD Gen2
64mm
2.52"
150 XFM HD Gen2
89mm
3.5"
250 XFM HD Gen2 / Colours XFM 89mm
3.5"
TIP:
If drilling large holes, alternate between applying pressure to the drill and relaxing the action to ensure
an even cut through the hull and the saw’s longevity. If cutting through Kevlar shield or metal, be
careful of overheating the hole saw.
3.
Sand the area around the hole using a heavy grit sandpaper to remove the previous bottom paint
and to ensure that the sealant will adhere properly to the hull. If there is any petroleum residue
inside the hull, remove it with acetone before sanding.
OceanLED INSTALL / ALLURE / 240717 / 7.1
