SPORTS SERIES
Single / Dual / Colours / DMX
.
INSTALL & OPERATION MANUAL
11
Sport DMX Colours operated by switch.
The Sport Colours DMX can either be used in DMX mode (e.g., using the OceanDMX RC controller kit) or simple DC
switch mode, where a simple toggle of the power switch can be used to change colour modes. To use in DC switched
mode; connect DC power +Ve to the RED wire, and DC power -Ve to the BLACK, BROWN & YELLOW wires:
Sport DMX Colours operated by DMX controller
When connecting Sport Colours DMX lights with an OceanLED DMX controller or a third-party DMX controller, please
refer to the table below and consult the installation manual of the 2-way DMX Junction Box and controller for the correct
connection method. It's important to note that when using the lights with a DMX controller, the cable from the light to
the junction box cannot be extended. When installing Sport DMX Colours, OceanLED requires a 2-way DMX Junction
Box for efficient distribution of power and the DMX signal.
Cable colour
Signal
Black
-Ve
Yellow
DMX +
Brown
DMX -
Red
+Ve
+
-
+
-
DMX-
DMX+
