SPORTS SERIES
Single / Dual / Colours / DMX
.
INSTALL & OPERATION MANUAL
25
6.2 ACCESSORIES
4 WAY DC POWER JUNCTION BOX
P/N: #019901
Simple fused Junction Box for splitting and distributing DC power (12/24V DC).
Provides 1x DC power input and 4x individually fused independent outputs.
2-WAY DMX JUNCTION BOX
P/N: #013205
DMX and Power distribution box for the SPORT Colours DMX and E3 Colours
DMX. Distributes power and DMX signals (12/24V DC). Provides 1x DC power
input, DMX-In and DMX-Out and two DMX/ Power outputs. Boxes can be linked in
chain. Each box has inbuilt on-board DMX terminator which can be turned on or off
depending on the installation requirements.
DMX Cables (to link between 2-Way DMX Junction Boxes)
DMX Control Cable 3 metre, P/N: # 011703
DMX Control Cable 5 metre, P/N: # 011706
DMX Control Cable 10 metre, P/N: # 011707
DMX Control Cable 15 metre, P/N: # 011708
DMX Control Cable 20 metre, P/N: # 011709
DMX Control Cable 25 metre, P/N: # 011710
AC POWER SUPPLY (for the AC installations)
P/N: #001-600072
Input: 100-240VAC, Output: 24VDC/ 6.3A, 150W, IP67 Rated
Model
Current @
24V DC
Max Nominal
Power
consumption
Number of lights that can be
connected to AC Power
Supply (including 10% power
reserve)
S3116d Single Colour
2.3A
66W
2
S3124d Dual Colour
1.7A
43W
3
S3166s Multi Colour
2.3A
66W
2
Sport Colours DMX
2.3A
66W
2
Explore XFM USB Configuration Interface
P/N: # 019909
The Explore XFM USB Configuration Interface is a USB interface to allow remote
configuration of the SPORT DMX lights using a Windows PC. It allows the setting
of base DMX address, change of operating modes and readback of stored
parameters.
Communication with the lights is achieved using the Remote Device Management
(RDM) protocol over the existing DMX network.
Products may vary from image shown.
