background image

16

Chapter 6: Warranty Statement:

This warranty statement is for those products supplied to and sold from all territories internationally 

OceanLED stands by its products. In general terms, the company gives a full 2 year’s manufacturer’s warranty on all 

of its products from date of sale from OceanLED.
Warranty replacements shall be covered for a period of 2 years from the date of the original product sale from 

OceanLED.
To claim, please contact an authorized OceanLED dealer and complete the troubleshooting guidelines and warranty 

claim form (available from www.oceanled.com). Claims may be disputed if the troubleshooting guidelines are not 

completed or no defect is found with the product. The detailed terms and conditions of this warranty are set out 

below.
However; please note that all metal parts corrode in salt water. The primary factors affecting corrosion are not 

directly related to our products and accordingly OceanLED cannot be held responsible for corrosion-related defects 

this includes where water has been allowed to enter the cable as a result of immersion in water during the installation 

or improper sealing of connections.  Please note corrosion will be particularly aggressive if installation and/or 

bonding have not been undertaken properly; or if stray currents are active in the vicinity of a boat.
Colour variation occurs within the LED manufacture. While we make every effort to match the colour of any lights 

there may be a noticeable difference. OceanLED does not warrant this colour variation on lights.
OceanLED reserves the right to change the design, range and components without any prior notification either 

written or verbal.
OceanLED does not cover any charges incurred for hauling of vessels.

1: WARRANTY OF QUALITY

1.1 

In the case of goods manufactured and sold by Ocean LED Marine LTD, a company incorporated in England 

and Wales (registered number 08927130) and whose registered office is at Unit 1 Jacknell Road, Dodwells 

Bridge Ind. Est. Hinckley, Leicestershire, LE10 3BS (the “Goods” and the “Company”, respectively), the 

Company warrants to the purchaser of the Goods (the “Buyer”) Conditions and unless otherwise notified) 

upon delivery (whether installed or not), and for a period of 2 years, that goods supplied shall be of 

satisfactory quality within the meaning of the Sale of Goods Act of 1979.

1.2 

the Company shall not liable for a breach of the warranty in Condition 1.1 unless:

1.2.1  the Buyer gives written notice of the defect to the Company, and to the carrier if the defect is as a result of 

damage in transit, within 14 days of the time when the Buyer discovers or ought to have discovered the defect; 

and

1.2.2  the Buyer has the obligation to provide all the requested information where is reasonably possible and 

provided a truthful statement of all information requested in relation to the claim.

1.2.3  the Buyer returns such Goods to the Company’s place of business at the Buyers cost, regardless of the 

outcome of the claim.

1.2.4  the Company is given a reasonable opportunity after receiving the returned Goods for the examination to take 

place at the Company’s place of business. 

1.3 

the Company shall not be liable for a breach of the warranty in Condition 1.1 if:

1.3.1  the Buyer makes any further use of such Goods after giving such notice; or
1.3.2  the defect arises because the Buyer failed to follow the Company’s oral or written instructions as to storage, 

transportation, installation, commissioning, modification, use or maintenance of the Goods or (if there are 

none) good trade practice; or the defect arises from the corrosion of metal parts or the failure of the Buyer to 

ensure that Goods are installed correctly, bonded correctly and that there are no active stray currents in the 

vicinity; or

1.3.3  the defect arises as a result of any default of, or caused by, the Buyer or (without limitation) as a result of 

misuse, abuse, improper installation, neglect, improper shipping by a party other than the Company; or

1.3.4  the Buyer alters, repairs or modifies such Goods without written consent of the Company; or

Summary of Contents for X4





















Reviews: