background image

 

 

Page 10 of 13 

SPECIFICATIONS 

The EBA-75 has been designed to provide respiratory protection during escape from oxygen deficient 
or hazardous atmospheres.  This device enables the user to breathe independently of the ambient 
atmosphere for a minimum period of 60 minutes. 

Performance Data 

Capacity 
 

110 liters of oxygen 

Note: proper use of the device for "User at Rest" - 6.5 hours maximum 

 
Dimensions 
 

21.8 x 30.2 x 11.7 cm (8.6 x 11.9 x 4.6 in) 

 
Weight 
 

8 lbs. (carry in operation) 

 
Operating Environment 

Minimum operating temperature 32

˚F (0˚C) 

 

Nominal cylinder pressure 

– 2000 to 2500 psi. 

Service life 

The EBA-75 is designed for a service life of fifteen years if properly inspected and if the conditions of 
use are observed. 

A Mandatory Factory Service action shall occur ten years from the date of manufacture if the units 
have been stored and five years from the date of manufacture if the units have been carried.  The end 
of service life for the EBA-75 is fifteen years from the date of manufacture regardless of the 
deployment method. 

The Conditions of Use for the EBA-75 are: 

A. Daily and 90-Day Inspections as defined in this manual. 

B. Caring for the EBA-75 as defined in this manual. 

C. Acceptable Storage of the EBA-75: the EBA-75 must be stored in an Ocenco approved 
 

carry case and securely fastened to a wall or other substantial structure. Devices stored on 

 

vehicles must be secured against movement in a fully enclosed metal container. 

D. Acceptable Carry of the EBA-75: the EBA-75 must be carried in an Ocenco approved carry 
 

case. 

Scrubber life is limited to one escape event or one oxygen charge. 

 
NOTE: 

If escape is necessary don the device regardless of temperature. 

 

DISPOSAL

 

Safe disposal is necessary after the EBA-75 has been used, fails inspection, or has exceeded the 
fifteen year service life. Ocenco EBA-75s must be disposed of in accordance with hazardous material 
disposal regulations. 

Summary of Contents for EBA-75














Reviews: