37
Ocmis Irrigazione S.p.A. – INSTRUCTION AND WARNING MANUAL – Translation of Original Instructions
MUMR-R1.02 .EN - 31/07/2015
CHAPTER 4 - Safety
4.2
DISPOSAL OF WASTE MATERIALS
After its installation and in normal operation, the machine does not involve environmental pollution, however, throughout the entire period of use some
waste materials are produced in special conditions, such as oil and fi lter replacement, oil fi lling/topping up.
Disposal of these materials is regulated by specifi c environmental protection regulations in every country.
It is the customer's obligation to be aware of the appropriate laws in force in their country and to operate in compliance with these laws, according to
the indications set out in the safety data sheets of the products used.
CAUTION
We would like to remind you of the requirement to comply with applicable laws on the disposal of mineral oils, battery acid, etc.
SUPPLEMENTARY INFORMATION
Please refer to the safety data sheets of the oils and other substances in chapter 9 for more information on disposal methods.
Disposal of toxic waste consisting of collection, transport and treatment, defi ned as required transformation operations for recovery, as well as storage
and dumping on the ground, are activities in the public interest subject to compliance with the following general principles:
a) Any damage or danger for the health and safety of the community or individuals must be prevented.
b) Compliance with health and safety requirements must be assured and any risk of air, water, soil and subsoil pollution must be prevented.
Systems for recovering and recycling materials and energy must hall be promoted, by complying with criteria of economy and effi ciency.
4.2.1
INSTRUCTIONS FOR SPECIAL WASTE
Special waste refers to residue from industrial processing and materials from demolition of deteriorated and obsolete machinery and equipment.
The manufacturers who produce the special waste, including toxic and harmful waste, are responsible for their disposal, either directly or
through fi rms, authorised agencies or by transferring the waste to the entities running the public service, with whom an agreement has
been entered into.
Each local council is responsible for providing residents with all the available information on waste disposal in their region.
IMPORTANT INFORMATION FOR THE USER PURSUANT TO “WEEE” DIRECTIVE 2012/19/EU (REPEALING DIRECTIVE 2002/96/EC AND
DIRECTIVE 2003/108/EC) ON WASTE FROM ELECTRIC AND ELECTRONIC EQUIPMENT.
Pursuant to “WEEE” Directive 2012/19/EU, if the component/equipment you have purchased is marked with the crossed out wheelie bin
symbol shown below, this means that, at the end of its service life, the product must be disposed of separately from other waste.
Separate collection of this equipment/component at the end of its service life is arranged and managed by the manufacturer. The user who wishes to
discard this equipment must therefore contact the manufacturer and follow the system implemented by them to separately collect equipment at the
end of its service life.
Appropriate separate collection for subsequent conveyance of the decommissioned equipment for recycling, treatment and compatible environmental
disposal contributes to avoiding possible adverse effects on the environment and human health and fosters reuse and/or recycling of the materials
the equipment consists of.
CAUTION
Illegal disposal of the product by the owner involves the application of the administrative penalties set forth by applicable laws.
IMPORTANT
If the equipment is not marked with the crossed out wheelie bin symbol, this means that product disposal is not the manufacturer's
responsibility, in which case common waste disposal regulations are applicable.
4.3
SAFETY DEVICES APPLIED TO THE MACHINE
The machine is equipped with the following safety devices:
Safety devices the machine is fi tted with
•
CONTROL LEVERS
•
FIXED GUARDS
4.3.1
CONTROL LEVERS
The machine is fi tted with a set of control levers that act directly on the circuit to operate it or stop it immediately.
DANGER
It is strictly forbidden to tamper with, disconnect of by-pass the actuators.
Summary of Contents for MR
Page 99: ......
