38
Ocmis Irrigazione S.p.A. – INSTRUCTION AND WARNING MANUAL – Translation of Original Instructions
MUMR-R1.02 .EN - 31/07/2015
CHAPTER 4 - Safety
Periodically check the correct operation of stop and actuation devices.
TEST PROCEDURE:
With safety circuits on, check the effi ciency of actuators before any work cycle.
Select one control at a time and ensure consistency of the control with the direction of the motion as specifi ed in chapter 6.
The operation must be repeated with the remaining controls.
It is recommended to record the periodic test procedure of these devices on a suitable form.
4.3.2
FIXED GUARDS
Fixed protection devices consist of fi xed guards that have the purpose of preventing access to the various moving parts of the machine during
operation.
The machine is fi tted with fi xed covers, which are located in areas exclusively accessed during maintenance and require specifi c tools to be removed.
DANGER
it is strictly forbidden to restart the machine after it has undergone maintenance without properly restoring the guards.
Periodically check the integrity of the fi xed guards and relevant attachments to the structure, with a special focus on the casings
protecting the machine's mechanics.
The following table shows the main components of the safety system.
Main components of the safety system
Fixed type casing installed to protect the reel rotation gear and turbo-
gearbox.
Fixed type casing to protect the reel moving chain.
Summary of Contents for MR
Page 99: ......
