60
Ocmis Irrigazione S.p.A. – INSTRUCTION AND WARNING MANUAL – Translation of Original Instructions
MUMR-R1.02 .EN - 31/07/2015
CHAPTER 6 - Use and Operation
a) By moving the lever to the WORK position, the top part of the corrector must touch the hose by effect of the return spring.
Calibration performed in the factory entails: for computer-less machines, the top part of the corrector touches the hose;
for machines with computer, the top part of the corrector is tangential
to the outer reel diameter.
MR-MR/1-MRR
WITHOUT COMPUTER
WITH COMPUTER
b) Pushing on lower bar “ A “ of the corrector, the lever must move into the release position (O or STOP)
and the upper part of the corrector must move away from the hose by a distance equal to about 1/2 Hose Ø, as shown in the picture.
Return spring
≈ 1/2 Ø Hose
Corrector
A
Summary of Contents for MR
Page 99: ......