86
Ocmis Irrigazione S.p.A. – INSTRUCTION AND WARNING MANUAL – Translation of Original Instructions
MUMR-R1.02 .EN - 31/07/2015
CHAPTER 7 - Maintenance
The sheet must include the following data:
1. Type of maintenance (preventative, disassembly instructions, etc.).
2. Maintenance sheet no.
3. Date when maintenance took place
4. Machine name
5. Type of operation
6. Reference drawing (if present)
7. Reference drawing no. (if present)
8. Frequency: minimum recommended operating frequency
9. Expected duration of the operation
10. Description, also with the aid of any drawings, of the type of operation with information on the points undergoing the operation
11. Information on the required spare parts to perform/complete the operation
12. Required equipment to perform the operation: wrenches, compressed air, gloves, etc.
13. Detailed description of the operations to be performed (in chronological order) in order to properly perform the activity. This section should also
include suggestions, warnings, any existing hazards in performing this maintenance activity.
7.8.2
LIST OF MAINTENANCE SHEET AND FREQUENCY
Below is information on the maintenance activities and their frequency.
7.8.2.1
EVERY 200 HOURS
•
Inject the specifi c product with grease pump (see pos. 2 paragraph 7.7.1) in positions : A and B paragraph 7.7.3
•
Inject the specifi c product with grease pump (see pos. 1 paragraph 7.7.1) in positions : C - D - N paragraph 7.7.3
•
Inject the specifi c product with grease pump (see pos. 2 paragraph 7.7.1) in positions : E - F - G - H paragraph 7.7.3
•
Spread the specifi c grease with paintbrush or spatula (see pos. 2 paragraph 7.7.1) in positions : I - L - M paragraph 7.7.3
•
Periodically check the tyre pressure (of the machine and trolley) (see paragraphs 2.4.3 and 2.4.4)
Note: Very important especially if the machine is towed on public roads.
•
Periodically check the tightness of screws fi xing the axle shafts to the traveller and tightness of wheels on axle shafts (see paragraph 7.4.2.7)
Note: Very important especially if the machine is towed on public roads.
7.8.2.2
BEFORE STORAGE AT THE END OF THE SEASON
•
It is recommended to partially empty water from the PE pipe, unwinding half the hose as for normal irrigation, remove the cap located underneath
the raingun trolley and rewind the partially unwound hose with the PTO.
•
Remove the cap under the turbine.
•
If the machine is equipped with battery, it must be removed and stored in dry, safe premises, away from children's reach and must be recharged
periodically. (see - Precautions with the battery par. 4.5).
•
For longer duration of the paint, clean the machine with a pressurised water jet, when it is dry spray all metal parts with a thin layer of a mixture
consisting in an anti-oxidising protective product like liquid wax.
NOTE
If the machine is equipped with: computer, battery, photovoltaic panel, internal combustion engine and/or electrical system
(Road Use Approval type), pay the utmost attention not to aim the liquid jets (detergent and protective) at these parts.
Summary of Contents for MR
Page 99: ......