87
Ocmis Irrigazione S.p.A. – INSTRUCTION AND WARNING MANUAL – Translation of Original Instructions
MUMR-R1.02 .EN - 31/07/2015
CHAPTER 7 - Maintenance
7.8.2.3
EVERY YEAR BEFORE THE START OF THE IRRIGATION SEASON
•
Carry out the instructions in paragraphs 7.8.2.1 and 7.8.2.2.
•
Change the gearbox oil with a specifi c product (see pos.3 paragraph 7.7.1 and paragraph 7.7.2).
•
Check the tightening of the fastening screws and/or nuts (see paragraph 7.4.2.7) of all load-bearing components: turntable between traveller and
turret, U-bolts, reel fastening supports, trolley supporting frame, etc.
•
Check the tightening of the fastening screws and/or nuts (see paragraph 7.4.2.7) of all couplings: external reel guards, water inlet with lower
turbine fi tting, turbo-gearbox on the frame, optional accessories, etc...
•
Check tightening of the fastening screws with straps and/or
fl anges for couplings: of the delivery hose between turbine / reel swivel connector and
of the PE hose between reel / raingun trolley.
•
If the machine is equipped with optional accessories, the checks set out in the
specifi c Manuals provided must be carried out, as well as the
instructions set out in the following paragraphs.
•
Prior to placement in the fi eld carry out the instructions set out in paragraph 6.2.
7.8.3
MAINTENANCE INFORMATION ON OPTIONAL ACCESSORIES
7.8.3.1
DISCHARGE VALVE
•
Before storage at the end of the season the fi lter containment box must be unscrewed and it must be emptied from residual water.
7.8.3.2
SLOW CLOSING INLET VALVE
•
Prior to starting every new irrigation run, it is recommended to unscrew the fi lter containment box, wash the fi lter and fi t it back on.
•
Before storage at the end of the season the fi lter containment box must be unscrewed and it must be emptied from residual water.
•
Before end of season storage it is required to ensure the valve is open.
7.8.3.3
INTERNAL COMBUSTION ENGINE
•
Please refer to the specifi c Use and Maintenance Manual provided with the machine.
•
The oil change and checks to be performed are indispensable and must be complied with according to the terms set out by its Manufacturer.
•
For warnings and precautions to be adhered to (see chapter 4.0 and chapter 7.0).
7.8.3.4
BATTERY
•
Please refer to the specifi c Use and Maintenance Manual provided with the machine.
•
The checks to be performed are indispensable and must be complied with according to the terms set out by its Manufacturer.
•
For warnings and precautions to be adhered to (see chapter 4.0 and chapter 7.0).
7.8.3.5
PHOTOVOLTAIC PANEL
In order to assure peak performance, the glass surface covering the photovoltaic cells must be kept clean. Only use water and a soft cloth for cleaning.
Do not use solvents or corrosive products.
Summary of Contents for MR
Page 99: ......