mounting the O-Focus to the lens
Depending on the setup, the LWS rod bridge can also be replaced
with a studio bridge to accommodate heavy-duty 15 mm or 19 mm
studio camera rods (see page 10).
(see OConnor >
Labs > ‘Rod Standards Explained’).
For more information about different types of camera rods visit
OConnor Labs online at the OConnor website
Turn the lock lever clockwise to secure the
main bridge in position. Ensure the bridge is
firmly locked to avoid backlash.
Turn the handwheel and make sure that the
driver gear engages with the lens focus
drive adjusting the lens focus smoothly in
either direction.
4
3
15
