5. SETTING THE DESIRED TEMPERATURE
-9-
When the factory default temperature is set to 20°C and the factory
default temperature is set to 20°C, the temperature of the
thermostat switch on the connected heating device is lower than
19.8°C (connecting terminals 1 and 2) and higher than 20.2°C
(disconnected terminals 1 and 2) under the switch sensitivity
(±0.2°C).
Adjust the knob, the display screen at the upper left corner will
appear "SET" (adjust the temperature) prompt, the back is bright,
(SET the temperature on the display gray), adjust the knob can be
adjusted to 5-35
℃
.
•
Approximately 5 seconds after setting the room temperature to
be maintained, the device automatically switches to normal mode.
The notice
“ SET ”
disappears from the bottom right corner of the
display, and once again the current room temperature is displayed.
