BIOS Enable/Disable: W2
Pins Jumpered
Description
[1-2]*
Enables the video BIOS
[2-3]
Disables the video BIOS
* = default
4.
Start PC SmartLINK on your desktop PC.
5.
Power on the Micro PC system. The Control Card logon
message should display on your PC monitor.
6.
Download the file, PGMVIDEO.EXE, and the *.DAT file for
your display (e.g. EL640.DAT) to your Control Card. Refer to
your Control Card user’s manual for detailed information on
downloading files to the Control Card using the TRANSFER
program.
NOTE: For previous users, the PGM5420.EXE has been
enhanced and renamed to PGMVIDEO.EXE.
NOTE: If you are using a flat panel display, refer to the
README.DOC file on the 5420 Utility Disk for a list of the
supported displays. Refer also to Octagon's web site,
www.octagonsystems.com, for the latest listing of supported
flat panels. If your particular display is not currently listed,
please contact Technical Support for assistance. The direct
line to Technical Support is 303–426–4521 and the
e–mail address is support@octagonsystems.com.
7.
Change the W2 jumper to W2[1–2]. This enables the 5420
BIOS.
NOTE: Do not power off the 5420 when changing the jumper
setting at W2.
8.
To program the 5420 for the appropriate monitor/display, type
the following:
<drive>:PGMVIDEO <drive>:Flatpanel.DAT
NOTE: “Flat panel” is the generic name. To obtain the correct
flat panel name specific to your model, refer to your 5420
Utility Diskette.
5420 Super VGA Video Card – 6
Summary of Contents for 5420
