4.
To program the 5420 for the appropriate flat panel display,
type the following:
A:PGMVIDEO <file>.DAT
The .DAT file will change depending on the type of display you
are using. The following message will be displayed:
VIDEO BIOS programming utility
------------------------------------------------------
PGMVIDEO Vers. x.xx Copyright (c) Octagon Systems Corp
------------------------------------------------------
You must reboot after running this program.
Make sure the jumper labeled EN-DIS is at the EN
position.
Do you want to continue? (Y/[N])
5.
Enter 'Y' when asked if you want to proceed. The program
PGMVIDEO then updates the video BIOS on the 5420. The
system displays the following message:
Programming ... Please wait ...
Verifying ... Please wait ...
PGMVIDEO completed.
If verification errors occur, confirm that the CPU shadowing is
disabled for the C000-C800 memory range and that CPU
caching is disabled as well; then retry programming.
6.
Power off the CPU, connect the flat panel display and power
on the desktop PC again.
EMI NOISE REDUCTION
EMI NOISE REDUCTION
EMI NOISE REDUCTION
EMI NOISE REDUCTION
EMI NOISE REDUCTION
If EMI noise generation becomes a consideration, EMI noise can be
reduced by grounding the metal VGA connector to chassis ground
by using braided wire and wire lugs.
5420 Super VGA Video Card – 13
Summary of Contents for 5420
