octagon v2.16
Page 29
15.2.6 FILLING THE AUGER
The filling of the auger is performed after you have first disconnected the flex hose from the
stainless steel tube of the burner and place a bucket to its end to collect the outgoing pellets.
Those pellets can be placed back to the fuel tank once you have finished.
Navigate through the MENU button < > to the PROGRAMMING (gear symbol).
The indication OFF will appear on the screen.
Press the EDIT b, - to go to number [ 6 ] and press ENTER.
The screen will display horizontal dots - - - - .
Keep ENTER button pressed constantly while the dots are blinking.
The auger starts to operate and transfers the pellets to the burning chamber. The duration
of this operation is approx. 30 seconds (30’’). On completion of the operation the auger
stops and OFF indication appears on the screen. This process is repeated one more time by
keeping the ENTER button pressed and wait for another thirty seconds (30’’). This will ensure
that auger has been filled successfully.
When OFF indication appears on the screen again you can move on.
To make sure that the auger has been fully loaded with
pellet please fill in the fuel tank with minimum three
(3) bags of pellet (45 kg in total) and activate the auger
for at least ten (30) minutes.
