31
Unit doesn’t power up
•
Pedal the machine for a few moments to charge the battery. The console
should illuminate after a few seconds. If it does not, contact your local
dealer for service.
Don’t feel a resistance change
•
Increase resistance level to 30 and pedal for 30 seconds. If you feel a
difference in the resistance, then the brake is working properly.
•
Are the cables connected correctly? Refer to the assembly instructions
and check connections. When re-connecting the cables, make sure you
feel each connector snap into place or hear a click that indicates a proper
connection.
•
If the issue persists, contact your local dealer for service.
“No HR” is displayed when doing
heart rate controlled programs
Heart rate controlled programs require that you wear a wireless chest strap or
grasp the digital contact heart rate sensors. First, verify that the wireless chest
strap is working properly:
•
Make sure the electrodes of the chest strap are against your bare skin. The
electrodes are the ribbed portion on the back of the chest strap.
•
For better contact, use water to moisten the electrodes on the side of the
wireless chest strap that sits against your skin.
•
Make sure the logo is facing away from your body and is right side up.
•
Make sure you have placed the chest strap at the bottom of your pectoral
muscles. Some adjustment to the strap maybe necessary for the strap to
get an accurate reading.
•
Make sure the strap is snug against your body, but not tight enough to
restrict breathing.
•
Have someone else try the strap standing next to the machine to see if it
works on him/her.
•
There may be interference with another electrical product (lights, TV,
personal stereo, wireless network, MP3 players, phones, etc...). Turn off
any other electrical product and check to see if the problem is resolved.
•
The battery in the chest strap may be faulty or worn out; replace the battery
and retest.
•
If you are using the contact heart rate grips, grasp each grip so that the
sensor portion of the grip rests in the palm of your hand.
•
Grip the contact sensors firmly and steadily.
•
Have someone else try the grips to see if it works for him/her.
•
If “NO HR” is still displayed on the console, contact your local dealer for
service.
tROuBlesHOOtinG & FaQs
electronic issues