30
Octane Fitness Confidential
1-800-68-634
3.3
Moving Handlebar Replacement
1. Unplug the unit. Handlebars are labeled “L” (left) and “R” (right); be sure to select the correct handlebar for
replacement.
2 Remove the handlebar cover from the handlebar pivot point by pulling it gently away from the machine.
3. Use a hex wrench to remove the four (4) 6mm hex key bolts. (Figure 3.3).
4. Remove the handlebar and slide the new one into position.
5. Insert and tighten the four (4) 6mm hex key bolts.
Make sure these bolts are very tight
.
6. Move the handlebars forward and backward a few times; they should feel tight with no side-to-side motion.
7. Position the handlebar cover over the handlebar pivot point and press it firmly onto the machine.
Figure 3.3