3.14 Heart Rate Sensor/Cable Replacement (Q45e/Q45ce)
1. Unplug the unit.
2 Remove the four (4) Phillips screws securing the console to the upright tube.
3. Unplug the cable assembly connector from the back of the console.
4. Remove the six (6) Phillips screws holding the two pieces of the console casing together and separate the
console casing.
5. Unplug the heart rate sensor cable from the console circuit board and remove it from the glue that holds it to the
console. (Figure 3.27).
6. Plug a new heart rate sensor/cable into the console circuit board.
7. Place the two pieces of the console casing together, holding the circuit board in place. Plug the console cable into
the console, listening for the click to ensure a good connection.
8. Carefully flip over the console casing and power on the machine. Put on a heart rate strap and verify that a heart
rate reading is displayed on the console.
9. Separate the console pieces again and glue the new heart rate sensor cable to the console, making sure the
wires are properly positioned so they won’t be pinched when the console pieces are pressed back together.
10. Place the console pieces together once more, making sure that the LEDs are aligned properly in the console
windows, and secure the console casing with the six (6) Phillips screws,
11. Re-attach the console to the upright tube with the four (4) Phillips screws.
Figure 3.27
Q45 3.14
Summary of Contents for Q45
